Edit Library Risk

Library risks are templates. Project copies can be edited independently.

Section Hazard / risk Default risk level Default residual risk Default control measure

The following work method should be followed for erecting scaffold: after enough components of the scaffold have been erected to support it, immediately install: A platform at least 450 mm wide along the full length of the section of scaffold, edge protection across the space between the uprights forming the outer frame of the scaffold at the level the scaffold has reached, a means of access (for example, temporary stairs or a ladder) to the level the scaffold has reached. Before the next level of the scaffold is erected, a platform should be installed below the level at a distance of not more than 2 metres. A section of the platform may be left open to allow the passing of planks or other scaffolding components between levels. A platform does not need to be installed on the bottom level of the scaffold. A platform may be removed after work has started two levels above the level from which the platform is to be removed. The following additional safe work practices should be followed when erecting scaffold. Scaffold ???fittings and other connections should be securely tightened. Where ???safety fittings??? are used, they should be fitted in accordance with the scaffolding plan. All scaffolding components should be installed as the scaffold is erected. For example, the installation of all bracing and ties, guy ropes or buttresses. Consider using specifically designed loading platforms and/or back propping to prevent overloading the building floor or the scaffold. Obtain certification from a competent person before erecting scaffold on awnings. Limit the number of workers on a scaffold at any one time. Develop a methodical work sequence if more than one worker will be on the scaffold at the one time for example, allocate specific tasks to each scaffolder. Work from a full deck of planks whenever possible. Do not climb on guardrails to gain extra height. Implement measures to control the risk of a fall if the internal gap (the gap between the inner edge of the length of the platform and the face of the building or structure immediately beside the platform) on scaffolds (includes hanging bracket scaffolds) is greater than 225 mm. For example, install edge protection, additional scaffold planks to minimise the size of the internal gap.

Default responsible party Tags High-risk category Active

Cancel