Edit Library Risk

Library risks are templates. Project copies can be edited independently.

Section Hazard / risk Default risk level Default residual risk Default control measure

Work On = 500mm electrical work zone for work on low-voltage & extra-low voltage equipment within an enclosed switchboard panel. If elimination of the risks and hazards cannot be achieved, then the hierarchy shall be applied to select controls that most effectively reduce the risk. The following is a hierarchy of controls such that the level of risk mitigation decreases with the order: ELIMINATE the hazard, which is always the first priority, e.g. by switching off and isolating. This may require rescheduling the work to a time when it can be de-energized. SUBSTITUTION, e.g. use of battery-powered tools instead of mains powered. This is not always an option but should be considered whenever possible. Use separation or ISOLATION methods such as barriers or distance from the hazard. Minimize risk through ENGINEERING, e.g. design, automation, provision of local isolation, containment or limitation, such as residual current devices (RCDs). Minimize risk by ADMINISTRATION, e.g. policy, procedures (including SWMS), safe work practices, signage and training. Minimize risk with PPE. Relying on PPE as the first line of defence is the least desirable approach and should only be used in conjunction when other alternatives are unavailable, or as an additional precautionary measure.

Default responsible party Tags High-risk category Active

Cancel